Spot Air Conditioner (FAQ)
FAQ
Is there an obstruction around the exhaust duct outlet?
Please use in a place where there are no obstructions around the exhaust duct outlet.
Exhaust heat cannot be properly released into the atmosphere, and heat builds up around the exhaust duct outlet and inside the exhaust duct, causing the compressor's outer shell temperature to rise, causing the overheating protection device to activate, and the equipment to malfunction.
Should the exhaust duct be bent or sloped down?
Please refrain from extremely distorting the exhaust duct or installing it on an extremely downward slope.
If the exhaust duct is crooked or installed at an extremely downward slope, ventilation resistance will occur and heat will accumulate inside the exhaust duct, causing the compressor's outer shell temperature to rise, causing the overheat protection device to activate and prevent it from operating properly. Masu.
Is it possible to extend the exhaust duct?
The exhaust duct cannot be extended and used.
Heat builds up inside the exhaust duct, making it difficult for exhaust heat to escape, causing the compressor's outer shell temperature to rise, causing the overheating protection device to activate, and the equipment to malfunction.
If you use an air supply duct to supply air from outside during cooling, won't the cooling efficiency deteriorate?
Using air supply ducts during cooling increases cooling efficiency.
To effectively cool a room, be sure to use an air supply duct in conjunction with an exhaust duct.
【Notes】
If you use an exhaust duct without using an air supply duct to exhaust only the exhaust air outside, indoor air will be exhausted outside, resulting in a sudden shortage of air in the room.
When there is a sudden lack of air indoors, outside air is brought in through gaps between windows and rooms to make up for the lack of air.
As a result, a phenomenon occurs in which warm outside air is brought into the room from outside.
Compressor does not work.
Please check the power supply.
A compressor requires a large amount of electricity to operate.
*The starting current when the TAD-2218W compressor is operating is 31/28A (60Hz/50Hz)
If you use a generator instead of a household power source, the compressor may not operate because the electricity required to operate the compressor cannot be obtained.
Even when used in a general household, the compressor may not operate due to voltage drop caused by using it with other appliances or using an extension cord.
When using the product, please use it alone within the range of the power cord with a general household power source.
Can the exhaust duct and air supply duct be extended?
Exhaust ducts and air supply ducts cannot be extended.
Please use the duct with a maximum extension width of 120cm. Extending the exhaust duct and air supply duct will impede the treatment of cold air and exhaust heat generated during dry operation, resulting in abnormal overheating inside the main unit. If the inside of the unit overheats abnormally, a safety device will activate and the compressor will stop. Repeated abnormal overheating may damage the product and lead to machine failure. Also, due to overload, the product's original performance may not be achieved.
Be sure to use genuine exhaust ducts and air supply ducts according to the instruction manual.